Product ID:E.C. CATALYST 5725
MSDS Date:01/01/1985
FSC:6850
NIIN:00N000096
MSDS Number: BCDRT

MATCOTE COMPANY, INC.

6001 ANTOINE
HOUSTON, TX 77018
US

Cage: GO793

MATCOTE COMPANY, INC.

10762 HOUSTON, TX 77018 US

Cage: GO793

POLYAMIDE

Fraction By Weight: 57.6%

TOLUENE (SARA III)

CAS: 108-88-3

RTECS: XS5250000

Fraction By Weight: 42.4%

OSHA PEL 200 PPM/150 STEL

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

Effects of Overexposure:ANESTHESIA,NAUSEA,DIZZ,IRRIT.TO SKIN &
EYES.NARC.IN HIGH CONC. MAY CAUSE MILD MACROCYTIC ANEMIA.

First Aid:REMOVE VICTIM FROM EXPOSURE IF INHALED. ART RESP. IF
NECESSARY. UPON SKIN CNTCT REMOVE CNTMNTD CLTHNG, WASH W/WATER.
UPON EYE CNTCT, FLUSH W/WATER IMMED.FOR 15 MIN. CALL A PHYSICIAN IN
ANY EMERGENCY.

Flash Point:40F TCC
Lower Limits:1.2
Upper Limits:7.0
Extinguishing Media:CO*2, FOAM, DRY CHEMICAL, ALCOHOL FOAM
Fire Fighting Procedures:USE ALCOHOL FOAM FOR LARGE FIRES (CLASS B
FIRE)
Unusual Fire/Explosion Hazard:DANGEROUS WHEN EXPOSED TO HEAT OR FLAME.
EXPLOSION POSSIBLE WHEN EXPOSED TO FLAME.

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. REMOVE W/INERT
ABSORBENT AND FLUSH W/PLENTY OF WATER.

Handling and Storage Precautions:AVOID HEAT, SPARKS, AND OPEN FLAMES.
AVOID PROLONGED OR REPEATED CONTACT W/SKIN.
Other Precautions:USE WITH ADEQUATE VENTILATION. WARNING: MAY CAUSE
SKIN SENSITIZATION OR OTHER ALLERGIC RESPONSES.

Respiratory Protection:SUPPLIED AIR RESPIRATORS
Ventilation:LOCAL EXHAUST PREFERRED. MECHANICAL IS ACCEPTABLE, THOUGH.
Protective Gloves:NEOPRENE TYPE
Eye Protection:GOGGLES
Other Protective Equipment:COVERALLS-PRTCT SKIN/CLOTES. RYR BATH AND
SAFETY SHOWER.
Supplemental Safety and Health
B.P. LISTED IS FOR TOLUENE. VAPOR PRESS. GIVEN IS AT 30C.

Boiling Pt:B.P. Text:231 F
Vapor Pres:36
Vapor Density:10.7
Spec Gravity:0.9245
Solubility in Water:MODERATE
Appearance and Odor:AMBER LIQUID WITH CHARACTERISTIC ODOR.
Percent Volatiles by Volume:45.2

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:HEST, SPARKS, AND OPEN FLAMES
Hazardous Decomposition Products:THERMAL DECOMP. YIELS CO.
Conditions to Avoid Polymerization:STRONG ACIDS AND EPOXY RESINS.

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH FEDERAL, STATE,
AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.